TES 3-4811WI

DC/DC Converter • • • • • TES 3WI Series, 3 Watt Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range –40°C to +70°C Short circuit protection Input filter to meet EN 55032, conducted class A • • • Remote On/Off • • Available in tape & reel package High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E The TES 3WI series is a family of high performance 3W DC/DC-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of –40°C to +70°C at full load. Further features are built-in EMI-filter to meet EN 55032 conducted class A without external components and remote On/Off control. The products comply with IPC J-STD-020E and are qualified for high temperature lead-free reflow solder process. 3-year product warranty Models Order Code Input Voltage Range TES 3-2410WI TES 3-2411WI TES 3-2412WI TES 3-2413WI TES 3-2421WI TES 3-2422WI TES 3-2423WI TES 3-4810WI TES 3-4811WI TES 3-4812WI TES 3-4813WI TES 3-4821WI TES 3-4822WI TES 3-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 750 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA September 20, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 300 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 300 mA 125 mA 100 mA typ. 75 % 79 % 81 % 81 % 78 % 81 % 81 % 76 % 80 % 83 % 83 % 80 % 83 % 83 % Page 1 / 4 TES 3WI Series, 3 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Short Circuit Input Power 20 mA typ. 10 mA typ. 155 mA typ. 75 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 4.5 VDC min. / 6 VDC typ. / 8.5 VDC max. 8.5 VDC min. / 12 VDC typ. / 17 VDC max. 8 VDC max. 16 VDC max. 10 mAp-p typ. 5 mAp-p typ. (The need of an external fuse has to be assessed in the final application.) 2 W max. Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (10 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output - dual output ±1% max. 0.5% max. 0.5% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Overload Protection Output Current Limitation Transient Response - Response Deviation - Response Time 75 mVp-p max. 3'000 µF max. 3'000 µF max. 3'000 µF max. 3'000 µF max. 180 / 180 µF max. 180 / 180 µF max. 180 / 180 µF max. 10 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 16 ms max. Continuous, Automatic recovery Foldback Mode 120% min. of Iout max. 2% typ. / 6% max. (75% to 100% Load Step) 150 µs typ. / 500 µs max. (75% to 100% Load Step) EMC Specifications EMI Emissions EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity 95% max. (non condensing) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TES 3WI Series, 3 Watt Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Moisture Sensitivity (MSL) Washing Process - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number –40°C to +70°C (without derating) +100°C max. –50°C to +125°C 3.3 %/K above 70°C See application note: www.tracopower.com/overview/tes3wi Natural convection (20 LFM) On: 2.5 to 5.5 VDC or open circuit Off: -0.7 to +0.8 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 5 mA max. -0.4 mA max. 180 - 580 kHz (PFM) 300 kHz typ. (PFM) Functional Insulation 1'500 VDC 1'000 MΩ min. 350 pF typ. 500 pF max. 1'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Plastic resin (UL 94 V-0 rated) Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD24 Lead-Free Reflow Soldering (acc. J-STD-020E) See application note: www.tracopower.com/info/reflow-soldering.pdf 8.8 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) e33565be-1414-415c-805c-ff0333727756 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes3wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TES 3WI Series, 3 Watt (0.039) 0.15 (0.006) (0.40 ±0.02) (0.08) R0 2.0 . (R 0. 5 02 ) 0.5 1.0 (0.02) 9.7 (0.38) 10.2 ±0.5 Outline Dimensions ° 0-5 9.4 1 2 3 2.18 5.08 (0.200) 18.8 (0.74) 14.8 (0.58) (0.41) 24.6 (0.97) (0.086) (0.37) 15 14 13 10.4 16.1 (0.63) 24 23 22 Ø1.5 (Ø 0.06) vent hole on bottom 10 11 12 17.78 (0.700) side (for reflow soldering process) 5.08 (0.200) All dimensions in mm (inches) Tolerance: x.x±0.25 (x.xx±0.01) Tolerance: x.xx±0.13 (x.xxx±0.005) Pin tolerance: ±0.05 (±0.002) 32.3 (1.27) Pinout Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 –Vin (GND) –Vin (GND) 3 Remote On/Off Remote On/Off 10 NC Common 11 NC NC 12 NC –Vout 13 +Vout +Vout 14 NC NC 15 –Vout Common 22 NC NC 23 +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) 24 NC: Not connected 1.6 5.08 17.78 5.08 (0.20) (0.70) (0.20) (0.80) 20.2 (0.58) 14.8 (0.06) (0.69) 17.5 (0.10) 2.7 2.54 (0.11) Recommended Solder Pad Layout 27.94 (1.10) Dimensions in mm (inch) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4